Ironworker LLC - edwards ironworkers

IRONWORKER LLC EXPANDS TO EUROPE.

2010-08-23T07:14:00.000-07:00

IRONWORKER LLC will be touring Europe for 14 days starting September 2, 2010. The primary goal of this trip is to find qualified vendors and distributors to handle the ever expanding IRONWORKER LLC product line. IRONWORKER LLC is committed to distributing the highest quality metal working machinery, primarily though its internet presence, WWW.IRONWORKERLLC.COM.

Hydraulic Ironworker Tooling

2010-03-12T09:28:00.001-08:00

IRONWORKER LLC, offers a large variety of standard as well as specialty dies, round, square, oblong, as well as special shapes. We also manufacture special tooling for punching and pressing specialty clusters of holes as well as many other unique applications. Just Call for more information: 715-574-9323

IRONWORKER LLC Adds New Product Line of Metal Pro Hydraulic Ironworkers and Tube Benders

2010-03-09T09:14:00.000-08:00

IRONWORKER LLC will now be handling the Metal Pro Ironworker and Tube Bender line as well as all Tooling for these machines. MetalPro Corp. is a leading domestic manufacturer of economically priced Ironworkers and Pipe and Tubing Benders. Their initial product, the MetalPro 4000 Hydraulic Ironworker has been commercially available since 1994. We stock a full line of accessories, including punch and die sets, press brake attachments and notchers for all the Metal Pro Ironworkers. We also stock a comprehensive range of dies for the MetalPro Pipe and Tubing Benders. For More information Check www.ironworkerllc.com or call: 715-574-9323

IRONWORKER LLC Ships Edwards Ironworkers To The Czech Republic

2010-01-27T20:44:00.000-08:00

IRONWORKER LLC has recently partnered with Emo Trans International the worlds largest Air-& Ocean Freight Service to bring Edwards Hydraulic Ironworkers into the Czech Republic. This cost effective freight alliance has reduced shipping costs paid by Czech customers by 70%. When purchasing an Edwards Ironworker you'll want to do business with the worlds largest supplier of Hydraulic Ironworkers, IRONWORKER LLC. Visit our web site at WWW.IRONWORKERLLC.COM or call us: 715-574-9323 Also Check out our shipping partner at: www.emotrans.com

New Hydraulic Power Unit From Edwards Mfg.

2010-01-27T15:17:00.001-08:00

This New Power unit can be used for the Edwards 10 Ton Tube and Pipe Bender as well as more shop accessories the we will be offering later on this year. For more information visit: WWW.IRONWORKERLLC.COM or call 715-574-9323

Edwards 100 Ton Jaws IV Ironworker

2010-01-27T15:10:00.000-08:00

4 Available Stations
High Capacity Angle Shear
Universal Open Station
The Workhorse

PUNCH
Max. Capacity 1-1/16" dia. in 1" plate
Work Height 41-1/2"
FLAT BAR SHEAR
Max. Width 3/4" x 14"
Max. Thick. 1" x 10"
Max. Round 1-1/4"
Max. Square 1-1/4"
Work Height 41-1/2"
ANGLE SHEAR
Max. Size 6" x 6" x 1/2"
Work Height 49"
OPEN STATION
Throat Depth 10"
Open Height 8-5/8"
Shut Height 6-3/4"
Stroke 1-7/8"
Work Height 39-1/4"

For More Information visit: WWW.IRONWORKERLLC.COM or call 715-574-9323

New 50 Ton Portable Punch From Edwards Ironworkers

2010-01-27T14:57:00.000-08:00

PUNCH
Max. Round Capacity 1" dia. in 5/8" plate
Max. Square Capacity 3/4" dia. in 5/8" plate
TOOLING OPTIONS & ACCESSORIES Punch and Die Starter Box, Optional Laser Light Alignment Tool, 20'-40' Hose Kits, Oblong Punches, Metric Round Punches, Hex Punches, Suspension Spring
McPUNCH SPECIFICATIONS
Rated Capacity 50 Ton
Throat Depth 4-1/4"
Cycle Time 3 seconds
Stroke 1-3/8"
Weight 225 lbs.
Dimensions 12" x 5-3/4" x 18-3/8"

HYDRAULIC SPECIFICATIONS
Electric Motor Standard 5HP, 3 Phase, 20B/240v, 1725 rpm, 14 amp
Electric Motor Options 5HP, 3 Phase, 440/480v or 575v, 7 amp; 5HP,1 Phase, 208/240v, 1725 rpm, 26 amp
Hydraulic Pump Size 3-1/2 gpm-single stage
Valve Pressure 2600 psi max.
Reservoir 7 gallons
Cylinder 3-1/2" ram

For More Information Visit: WWW.IRONWORKERLLC.COM or call: 715-574-9323

Edwards Ironworker 10 Ton Pipe and Tube Bender

2010-01-27T14:47:00.000-08:00

General Specifications:
The Best Pipe and Tube Bender on the Market!!!!
Made in the U.S.A.

Heavy Duly All Steel Construction
Smooth, Fast operation
180 Degree Bend Capacity
Easy To Use Hand Controls
Operates Horizontal or Vertically
Heavy Duty Rolling and Locking Stand
Auto Stop Feature For Repeatable Bends
Quick Disconnect Hoses
2" (10) Schedule 40 Pipe Capacity
2-1/2" (00) .095" Tube Capacity
2-1/4" .083" Chromoly Capacity
Die Sets Sold Separately
One Year Warranty
Cylinder 1-3/4" ram
Stroke 14
HYDRAULIC OPERATING REQUIREMENTS
Electric Motor Standard 5HP, 3 Phase, 20B/240v, 1725 rpm, 14 amp
Electric Motor Options 5HP, 3 Phase, 440/480v or 575v, 7 amp; 5HP,1 Phase, 208/240v, 1725 rpm, 26 amp
Hydraulic Pump Size 3-1/2 gpm-single stage
Valve Pressure 3000 psi max.
Reservoir 7 gallons

For More information Visit: WWW.IRONWORKERLLC.COM or call IRONWORKER LLC 715-574-9323

New 40 Ton Edwards Ironworker

2010-01-27T14:41:00.000-08:00

The 40 Ton is the shopmate of the Edwards Ironworker product line. Featuring four available workstations, the 40 Ton incorporates a universal open tooling cavity, 10” bar shear, punch station, angle shear, electric foot pedal, and electric stroke control as standard features.

The 40 Ton will notch 2” x 4” in 1/4 ” plate, punch 1”
holes in 1/2” plate, shear 3” x 3” x 1/4” angle and shear
3/8” x 10” bar stock.

Optional 40 Ton (A) equipped with quick disconnect hydraulic and electrical ports easily accepts our optional Hydraulic Tube Bender attachment in seconds.

You can find more information about the New 40 Ton Edwards Ironworker at: WWW.IRONWORKERLLC.COM

IRONWORKER LLC Introduces the first Pneumatic Hold Down Fence available for all Edwards Hydraulic Ironworkers!!

2009-10-27T09:45:00.000-07:00

Ironworker LLC now offers the quick and reliable pneumatic hold down fence for Edwards Ironworkers. The Hold down is operated by a hand controlled switched located on the top of the foot pedal control. Air pressure must be supplied by the shop owners air compressor. This fast and effective tool speeds up production by reducing the time required to compress stock in the main shear.

The Pneumatic Hold Down Fence is available as a bold on package. IRONWORKER LLC also offers a detached air compressor unit powered by a 110 volt electric motor, to power the Pneumatic Hold Down Fence if compressed air is not available.

If you are interested in saving time and money when using you Hydraulic Ironworker then this option is for you. Call Ironworker LLC Today 715-574-9323.

Hydraulic Ironworkers Have Higher Return On Investment

2009-10-27T09:44:00.000-07:00

In today’s current economic climate, capital purchases must have a strong return on investment (ROI). Fabricators and manufacturers have many choices to make as to how and what to spend their money on when reinvesting in their operation. Depending on what kind of work the shop does ultimately determines the type of equipment that will be purchased. For a developing operation a hydraulic ironworker often will have the largest ROI compared to other equipment.

How high can this ROI be? As high as 60 to 90 percent a year. When bidding on jobs that require the use of an hydraulic ironworker, the rate is typically 25 to 50 cents per cycle of machine. This figure is subject to the volume of the job; for example, if a customer wants standard “L” brackets manufactured out of ¼ inch thick by 4 inch wide steel plate, with four holes punched in it, two and each end. The standard rate for this would be figured as follows: Shearing the plate from 20 foot length = two shears = 1.00 Dollar. Punching four holes = 2.00 dollars. One bend = 50 cents, so the total for all operations equals $3.50. Again this total is subject to a shop minimum order and the cost of material would also have to be figured into this. This a very simple example of how most fabricators and manufacturers bid on and determine the price for certain jobs.

The highest ROI can be achieved when the hydraulic ironworker can be purchased for a particular job or if the shop owner can secure a contract requiring special tooling specific to the job. An example of this would be stamping out 3 inch square base plates with multiple holes. This type of operation could be accomplished with one cycle of the machine, provided the appropriate tooling was purchased. In this example, once the shop owner is set up, the operation will become extremely profitable as the volume of parts produced increases.

Moreover, the Hydraulic Ironworker typically has the highest return on investment for most fabricators and manufacturers when compared to other equipment. For more information about ROI on Hydraulic Ironworkers contact Ironworker LLC.

For more information check out our web page: WWW.IRONWORKERLLC.COM

Hydraulic Ironworkers from China? Are they any Good?

2009-10-27T09:42:00.000-07:00

In todays global manufacturing economy quality sometimes takes a backseat. Traditional "knick-knacks", toys and even heavy industrial equipment is being manufactured in China and other Asian countries. The goal of this post is to warn fabricators and shop owners about hydraulic ironworkers produced outside of the U.S.A.. Currently there are several brands of hydraulic ironworkers being sold in the U.S. that lead consumers to believe they are manufactured in Germany or elsewhere.

When comparing hydraulic ironworkers, it is prudent to ask the supplier where the ironworker is manufactured and what kind of warranty, if any, is offered. Often ironworkers are sold with a one or two year warranty honored by the manufacturer. If this is the case with an import machine you may have difficulty finding parts and product support. Ironworker LLC recommends buying an American made ironworker or one manufactured in Europe. If you are currently shopping for an ironworker you may want to check out this website, www.alibaba.com . On this site you will see many China made ironworkers that you may recognize from literature you may have received from a local dealer.

When shopping for a hydraulic ironworker it is important to be in the know. The more information that can be collected to make an informed decision the better. In short, do not be fooled. Do your research and think long term when investing in your shop. A hydraulic ironworker is not made out of plastic. Steel quality, weld integrity and mechanical stability are important. So when purchasing your next ironworker, be in the know.
For More Information check out our webpage: WWW.IRONWORKERLLC.COM

How to Choose the Correct Hydraulic Ironworker for Your application

2009-10-20T08:47:00.000-07:00

When choosing which hydraulic ironworker is right for your application, it's important to consider three areas: size (Tons required), foot print of machine and what operations you want the Ironworker to perform.

SIZE: Most ironworkers are rated in Tons (2000 pounds) or Metric Tons (2200 pounds) at the punch end. It is important to know the type of material and the thickness of material you will be pressing or punching. For example, to punch a 1-1/16” hole through 5/8” mild steel plate will take approximately 53 Tons. For a first time user it is important to note that no ironworker will be able to punch holes through material thicker than the width of the punch. For example, an extreme case of this would be an operator trying to punch ¼” holes in 1” thick plate. This would not work because even though the punch is harder than the plate, the plate still has more integrity than the punch. Holes can only be punched the same size as the material to be punched or larger. To select the right ironworker for your application, determine the maximum plate thickness and hole size to be punched. Using a slide chart provided by any Ironworker dealer, determine the tons required. It is recommended to add 15 to 20 percent more capacity to the tons required so as not to stress the machine. It is also important to note that you may have to double the tons required if punching through harder material such as carbon steel or stainless steel.

FOOTPRINT : When choosing an ironworker it is important to consider the footprint or floor area that the machine will take up, and at what end the punch will be located. ironworkers can process material infinite in length, so the room that is allowed in the front and rear of the machine depends on the application and the length of material to be worked on.

OPERATIONS: Almost every ironworker manufacturer builds a shear into the center of the ironworker. The major differences in ironworkers are the number of stations and where they are located. Some models have as little as 2 stations and others have as many as 5 or 6. Determining the correct model for your shop can be a challenging task. Most of the machines on the market today have open cavities where almost any tooling can be bolted into place and aligned in a matter of minutes. Few ironworkers have built in rod and square bar shears. Some have built in copper notchers and most have angle shears. Whatever operation the ironworker may be used for, its important to choose a model that can adapt to future needs.

You can always find out more information on our web-site...

www.ironworkerllc.com